Skip to product information
1 of 12

10,000 lbs Car Lift L1100 2 Post overhead Car Auto Truck Hoist 220V

10,000 lbs Car Lift L1100 2 Post overhead Car Auto Truck Hoist 220V

Regular price $1,419.79 USD
Regular price $2,700.00 USD Sale price $1,419.79 USD
Sale Sold out
Tax included. Shipping calculated at checkout.

About this item:

Auto Car Lift  L 1100 220V  60HZ  1PH   3HP MOTOR features Symmetrical Arm Assembly with Straight Front / Rear 2 Stage reach from 30 1/4" to 49 1/5" and Equal length of front and rear arm design Drop-in type lifting pads and truck adapters are included.

Features:

Safety Mechanism:

  • Double Point Safety Lock Release
  • Automatic arm lock restraints
  • Relief valve built in power pump to prevent overloading
  • Door guards protection rubber
  • Up-limit switch to protect cylinders working stroke used in safe length scope
  • Heavy duty 5/16" diameter cable and 4.56" pulley reduce high stress on synchronization process and increase cable life
  • Stiffened base plate 5/8" thickness
  • Ultra high molecular self lubricating nylon slider ensures carriage smooth moving up and down
  • Anchor bolts/mounting hardware included

Control System:

  • Lifting operation by pressing "UP" button on motor
  • Manual lowering operation by pressing lever
  • Relief valve built in power pump to prevent overloading
  • 1 sets truck adapters included
  • Lifting Capacity: 10,000 lbs
  • The overall Height  145-5/8"
  • The overall Width  133-1/4"
  • Column Width    10.62"
  • Base Width   18.89"
  • Column Thickness of Steel    3/16"
  • Carriage Thickness of Steel   15/64"
  • Arms Thickness of Steel     15/64"
  • Front Arm   30.7" to 48
  • Rear Arm  30.7" to 48"
  • Min pad height: 3-7/8"
  • Lift height max: 78-7/8"
  • Drive-thru width clearance: 100"
  • Time to full rise: 20-60 sec
  • Shipping Weight: 1460 lbs

Site Selection:

Before installing your auto lift, check the following:

  • Lift Location: Always use architect’s plans when available.
  • Check layout dimension against floor plan requirements making sure adequate space is available.
  • Your lift requires a 220v, 30amp, single phase, grounded electrical source.  There should be room enough to operate the lift in a safe manner and without restrictions.
  •  Overhead Area: The area where the lift will be located should be free of overhead obstructions such as heaters, building supports, electrical lines, doors, lights, etc.
  •  Floor Area: Visually inspect the site where the lift is to be installed and check for cracked or defective concrete.

Floor Requirements:

  • A level floor is suggested for proper installation and level lifting.  Small differences in floor slopes may be compensated for by proper shimming.  If a floor is of questionable slope, consider a survey of the site and/or the possibility of pouring a new level concrete slab.
  •  New concrete must be adequately cured for at least 30 days.
  • DO NOT install auto lift on any asphalt surface or any surface other than concrete.
  • DO NOT install auto lift on expansion seams or on cracked or defective concrete.
  • DO NOT install auto lift on a second/elevated floor without first consulting building architect.
  • DO NOT install auto lift outdoors unless special consideration has been made to protect the power unit from inclement weather conditions.

Concrete Specifications:

All models MUST be installed on 3,000 PSI reinforced concrete only.  Additional concrete requirements will vary by lift.

  • 8,500 lbs – 10,000 lbs lifts: 4″ Minimum Thickness
  • 11,000 lbs – 15,000 lbs lifts: 6″ Minimum Thickness

specifications:

  • Condition: New
  • Modified Item: No
  • Custom Bundle: No
  • Material: Metal
  • Capacity: 10000lbs.
  • Type: 2-Post Lift
  • Features: Hydraulic
  • Vehicle Type: Passenger Vehicle
  • Brand: ,XK USA
  • Non-Domestic Product: No
  • Warranty: 1 Year
 
View full details