Skip to product information
1 of 24

Atlas PK-412A 12,000 lbs 4 Post Alignment Lift

Atlas PK-412A 12,000 lbs 4 Post Alignment Lift

Regular price $2,399.00 USD
Regular price $8,408.00 USD Sale price $2,399.00 USD
Sale Sold out
Tax included. Shipping calculated at checkout.

The Atlas® PK-412A is a 4 post alignment lift with a 12,000 pound lift capacity. The lift is designed and built to commercial grade standards and will provide many years of service. 

The Atlas® 412A incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money. The 412A is tested to ensure that this lift system will perform flawlessly at its rated capacity. 

The Atlas® 412A uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift.

Many competitors use an “old style” chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to “level” properly and the exposed hydraulic cylinder is responsible for numerous “door dings”.

Besides having all the heavy duty features of the Atlas® 412, such as “tracks” between the runways to allow the use of a rolling bridge jack (the Atlas® RJ6BK) on the lift (rolling jacks sold separately) the 412A features slip plates and alignment turntables.

The slip plates are built in and are assured to be level with the turntables. The turntables can be set in different positions on the runway to accommodate a wide variety of wheelbases. The 412A also features metal cover plates to replace the turntables when not in use and so the lift can be used for more than just alignments.

 

Features & Benefits

  • 12,000 lb. Capacity
  • Heavy Duty, Commercial Grade
  • Extra Tall, Extra Wide & Extra Long
  • Built-In Slip Plates & Alignment Turntables Included
  • Multiple Positions for Turntable Placement
  • Runway Covers Included (when Turntables are Removed)
  • Air Operated Single Point Lock Release (External Air Supply Required)
  • Lock Ladder Design
  • Double Lock Safety System
  • Powder Coat Finish
  • Steel Approach Ramps Included
  • Additional Drive off Ramps Available (Sold Separately)
  • Runway Extensions (Free with Purchase)
  • Mounting Hardware Included
  • 220volt/1phase Electric Operation (Requires a 30amp Breaker)
  • 5 yr Structural – 2 yr Hydraulic Warranty – Parts Only

 

Atlas® ATPK-412A Specifications

Capacity 12,000 lb.
Lifting Height 75" (6' 3")
Overall Width Of Columns (Without Motor) 126 1/4" (10' 6 1/4")
Overall Width Of Columns (With Motor) 135 1/4" (11' 3 1/4")

Overall Length With Approach Ramp

236 1/2" (19' 8 1/2")
Length Between Columns 184 1/4" (15' 4 1/4")
Runway Length 195" (16' 3")
Runway Width 20"
Thickness Of Runway 7"
Width Between Runways 43 1/4" (w/ Rail 39 3/4")
Outside Runway To Outside Runway 83 1/4" (6' 11 1/4")
Clearance Under Runways 67 7/8" (5' 7 7/8")
Clearance Between Columns 112 5/8" (9' 4 5/8")
Height Of Columns 86" (7' 5 2")
Maximum Wheel Base 185" (15' 5")
Drive Thru 98" (8' 2")
Air Requirement

85-115 PSI (EXTERNAL AIR SUPPLY REQUIRED)

Motor/Electrical Requirement

220 volt single (1) phase.

A 30 amp breaker is recommended

Oil Requirement

3-5 Gallons

AW32/AW46 (NOT INCLUDED)



Requires a minimum of 6" of concrete with a 3000 psi. rating

View full details