Skip to product information
1 of 22

Atlas PV12PX 12,000 lbs 2 Post Overhead Lift

Atlas PV12PX 12,000 lbs 2 Post Overhead Lift

Regular price $1,998.00 USD
Regular price $6,817.00 USD Sale price $1,998.00 USD
Sale Sold out
Tax included. Shipping calculated at checkout.

The Atlas® PV12PX is a commercial grade lift designed to accommodate both long wheel base trucks and because of a low pad height, passenger cars.

The distance between the symmetrical columns is almost 123″ with a drive through space of over 108″. The extra distance between the symmetrical columns will allow the widest of vehicles or vehicles with wide rearview mirrors to be lifted or driven through.

The increased length of the symmetrical arms coupled with the additional height of the included peg style truck adapter set allows the operator to safely raise long wheel base trucks with a variety of running boards.  The extra height means extra clearance allowing you to lift vans and box trucks without worry.

The Atlas® ATTD-PV12PX features three height settings, the lowest setting of 152 inches or 12 foot 8 inches requires the purchase of extra short cables.

 

Features & Benefits

  • 12,000 lb capacity
  • Extra Tall & Extra Wide
  • Commercial Grade
  • Adjustable height 165″ (13′ 9″) or 177″ (14′ 9″)
  • Special low height 152″ (12′ 8″) (Requires purchase of extra cables)
  • Symmetric arms
  • Automatic Arm Restraints
  • “Padded” Shut-Off Bar
  • Door Guards on Carriages
  • Single Point Lock Release
  • Direct-Drive Cylinders
  • Powder Coat Finish
  • Free 12 Piece Truck Adapter Set
  • Mounting Hardware Included
  • 5 yr Structural – 2 yr Hydraulic Warranty – Parts Only

 


Atlas® ATTD-PV12PX Specifications

Capacity 12,000 lb.
Overall Height 165" (13’ 9”) or 177” (14’ 9”)
Special Low Height 150 3/8" (12’ 6 3/8”) (Requires Purchase of Extra Cables)
Overall Floor Width 150 3/8" (12’ 6 3/8”)
Outside Column to  Outside Column 139 1/8" (11’ 7 1/8")

Maximum Lift Height (Without Adapters)

72 1/8"
Maximum Lift Height (With Adapters) 83 1/8"
Minimum Arm Height 4 1/2"
Inside Column 122 5/8” (10’ 2 5/8”)
Drive Thru 108 5/8" (9’ 5/8”)
Column Size 7 1/2" x 14 1/2"
Column Thickness of Steel 6mm
Base Of Lift 17 1/2" x 20 1/2"
Motor/Electrical Requirement 220 volt single (1) phase.
A 30 amp breaker is recommended
Oil Requirement 3-5 Gallons AW32/AW46 (NOT INCLUDED)


Adapter Heights 4 Each 2”, 3”, 6”
Arm Hole/Adapter Peg Size 1.5”

Requires a minimum of 6" of concrete with a 3000 psi. rating

View full details